Getting started SIP VoIP Termination Business with VoIPTraffic!

Learn how to route VoIP calls with VoIPTraffic and start own SIP VoIP termination business following the steps:

1. Sign up

Go to 'Sign Up' page and follow the instructions.
You can choose one of 2 currencies available for accounts (for tariffs, billing and payments): EUR or USD.
Please note: It is impossible to change the currency of the account once it is created.
After the procedure has been completed, you will receive your login data (username & password) by E-mail.
Go to 'Login' page and enter your self-care area using the username & password received.
When logged in you will be able to see your current balance, browse and download your CDRs and Invoices, configure your fixed/static IP addresses and make prepayments

2. Configure equipment

You will also receive the data for the first default SIP account created for you. You can use those SIP-username & SIP-password to configure your equipment (SIP trunk to our SIP server) in order to make calls. Here are the settings for SIP connection:

SIP Proxy/Registrar: or
UDP: port 5060 or 7060
TCP: port 5074
SIP username: your username received
SIP password: your password received

If prefer connection using fixed/static IP addresses (use Remote IP authentication instead of Digest one), you can configure the fixed IP addresses of your gateways/servers in your self-care area. If you are using a hosted VoIP switch/gateway, please be sure you use these IP addresses only- they are uniquely assigned to your account. All incoming calls from those IP addresses will be associated with your VoipTraffic account. After we will authenticate your IP, you can connect by using one of the following VoipTraffic IP address:

SIP (Proxy/Registrar):
The list of codecs supported:

G.723.1 (5.3 & 6.3 Kbps)
G.729 (8 Kbps)
G.711 A-law (64 Kbps)
G.711 μ-law (64 Kbps)

Fax support: Group III at 2.4, 4.8, 7.2, 9.6, 14.4 Kbps, using industry standard T.38
DTMF relay: Signaling via RFC2833 or SIP Info
Please be noted that the selection codes for our 3 different products are as follows:
Premium: 00000 or blank (dialing format is 00000+E.164 or E.164)
Standard: 00 (dialing format is 00+E.164)
Wholesale: 00001 (dialing format is 00001+E.164)
Example: for a call to Germany through:
Premium you have to dial 0000049xxxxxxx or 49xxxxxxx
Standard you have to dial 0049xxxxxxx
Wholesale you have to dial 0000149xxxxxxx

3. Test your connection

Now you are able to make few test calls in order to check your connection (we have applied some credit for this application). You can call to any destination in the world you like to be sure all is working properly.

4. Make pre-payment

In your self-care area you will find various payment methods such as Bank Transfer, Credit Card and PayPal. You can use one of them in order to Top-Up your balance at any time.

Rates and billing conditions

Our rates are billed per second from the first second on all destinations. There is NO call-setup fee applied and NO any hidden charges. Click here for our current rates overview and download.

Have a Question?

If you have any further questions, please visit our 'FAQ' page. Almost all questions are answered there.